Thursday, August 4, 2011

Lace Hat Pattern

I wish that I was a little more creative and could come up with some great name for this hat, but that just is not the case.  The hat is made using lace stitches, so it will be the Lace Hat for now.  If anyone has any suggestions for another name, I am totally open to hearing them.  

The hat did not take too long to knit.  An important thing to remember is using a yarn that has a little stretch and making sure to not let your stitches get too tight.  There is a lot of moving yarn from pegs to pegs and if your stitches are too tight it will make it very hard to complete.  

                                                                        Lace Hat
                                                                                                                                                          
You will need:  a loom with multiples of 6loom hook, stitch markers, and yarn with some stretch. 
 
Skills you will need to make hat: e-wrap,  knit (k), purl (p), yarn over (yo), and knit 3 together (k3tog).

Notes:  Stitch markers are not necessary, but they do make it so much easier to keep up with your pattern.  I started using stitch markers earlier this year and I really can't believe it took me so long to use them. 
I used Caron Brand Simply Soft in Victorian Rose.  I think it is obvious by now if you have read through my blog that Caron Simply Soft is one of my favorite yarns.
I was able to use the green Knifty Knitter with 36 pegs.  I normally cannot use the green loom for adult hats, but this hat has such an open design that it will stretch and not look silly on an adult. 
I used two strands of yarn held as one.
I used the u-wrap for the knit stitch.  This helps to make sure the stitches are not too tight.
Yarn Over - you will need to move the loops that are on this peg, so the peg will be empty.  Take your working yarn and just lay it in front of the peg.
Knit 3 Together - You will be taking the yarn that is on the pegs before and after the peg and put it on the peg.  You will then lay your working yarn on top of the peg that will have 3 loops on it and knit over.  This can be tricky.  But, if your stitches are not too tight it is possible.  I also found that if I just knit them over one at a time this worked well.


Now finally the actual pattern of the hat.  :)

1.  If you are using stitch markers split your loom into sections of 6.  

2. Cast on using the e-wrap.

3.  I made a ribbed brim by doing p2, k2 * repeat this around the loom.  Continue doing this for a total of 8 rows.

4.  YO, K3tog, Yo, P, P, P * repeat this pattern around the loom.

5.  K, K, K, P, P, P *repeat

6.  P,P,P, YO, K3TOG, YO * repeat

7.  P,P,P,K,K,K * repeat

8.  Repeat patterns 4-7 until hat reaches the desired length.  I had to do the pattern for a total of 8 times.  I probably could have done it 7 times, but I like for my hats to come down over my ears.  

9.  Once your hat is big enough, decrease your pegs by half.  Take yarn on peg 1 and move it to peg 2.  Take the bottom yarn over the top yarn.  Continue moving all the yarn on  odd pegs to even pegs.

10.  Finish by gathering the hat in whatever way you like.  



I hope you enjoy this pattern.  If you need any help with hat, please leave a comment.  If you make a hat using this pattern I'd love to see it.  Please leave a comment with a link to your picture.  Feel free to share this pattern, but please include a link to my blog. 

 
 


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.

46 comments:

  1. Jessica, not sure when I'll get to try this pattern but it looks fantastic! Can't wait to try it soon! If you'd like maybe I could make a YouTube video for you when I figure it out? If you'd like i can hook you up with AllFreeKnitting.com and they could link the pattern to your blog for you :-) more readers! Have a super loomy day!

    ReplyDelete
  2. This is such a lovely stitch pattern and your hat is gorgeous! Thanks for sharing your talent!

    ReplyDelete
  3. GoodKnit Kisses - thank you so much for the nice comments. I have thought about making videos for you tube, but just have not taken the time to do it. If you did make a video and gave me credit for the hat that would be great. :) And I would love to get the hat added to AllFreeKnitting.com. Thanks.

    Brenda - thank you for checking out my hat. Your blog is one of the first blogs I started reading when I started loom knitting.

    ReplyDelete
  4. Oh my goodness! Love the hat- but mine just looks like it has random holes! Ha! I hope someone gets to that video soon!!

    ReplyDelete
  5. Sarah, sorry your hat didn't come out like you were hoping. What kind of yarn did you use and did you have a part that was difficult to complete? Let me know and I will try and answer any questions.

    ReplyDelete
  6. Wow! Very beautiful! :)

    ReplyDelete
  7. I tried this hat, And it came out okay, but doesn't look anything like your picture. I believe I am messing up the K3tog and YO. Maybe if you could help me. i treid to find some videos but didnt have much luck. Awesome work anyway. Thank you

    ReplyDelete
  8. Sorry you had trouble with the hat. I will be happy to help if I can. I don't think there are any videos. I could try and make a video, but it would have to be sometime next week. I've never made one before, but if that would help with this hat I could try. Or I could do a picture tutorial. Again, it would have to be sometime next week. Let me know. I would love to help. Can you post a link to a picture of your hat?

    ReplyDelete
    Replies
    1. Ive been trying to make this hat, and have frogged it I dont know how many times. If you do find the courage to film a tutorial on this project, I would greatly appreciate it (as I'm sure others would as well) thank you for posting the pattern, it's beautiful.

      Delete
  9. i liked so much and i will try it and i will put the picture here

    thank u

    fedra

    ReplyDelete
  10. I tried to make this hat and it's come out nothing like yours unfortunately :-( More like the random holes Sarah describes above...

    ReplyDelete
  11. This comment has been removed by the author.

    ReplyDelete
  12. I really wanna try this hat, I am just unsure of the Yarn over part, could you maybe go into a little more depth. I don't necessarily need a video, just more explanation if possible? please?!! :) thanks :)
    the way i understand it is the yarn over is to go over the pegs on each side of the K3tog stitch? so you aren't dropping stitches? if so, how do you do so? just by wrapping around the peg like when you cast on?...

    ReplyDelete
  13. Hi Marie, I will try my best to explain the yarn over and k3tog. When you get to the peg for the yarn over DO NOT wrap it like when you cast on. You want to just take the working yarn and lay it flat across the empty peg. This is what is going to create the lace in the pattern. When you get to the peg that had the yarn over on the next round you will just knit over like normal.
    So you will have 3 pegs that will be used to do the yarn overs and the k3tog. 1. The first peg will be empty because you will be moving the stitch to the second peg. 2. The second peg will now have 2 stitches on it. 3. You will then take the stitch from the 3rd peg and be putting them on the second peg. 4. Now your second peg will have 3 stitches on it. 5. Take your working yarn and lay it in front of the first peg. 6. Take the working yarn and lay it flat across the second peg and knit ALL three stitches over the working yarn (this is a flat knit). 7. Take your working yarn and lay it flat across the 3rd peg. 8. You will now purl the next 3 pegs.
    I hope this helps. It is really the best I can explain it without pictures or a video. Please let me know if this makes sense.

    ReplyDelete
    Replies
    1. Thank you so much for the farther explanation :) it helped so very much. I just taught myself all the Stitches to make this hat. I had never done any other stitch than the e wrap. But because of you generous farther explanation, i have it down :) i am making this hat for my grandma For her birthday and i think she will love it. Thank you thank you for sharing this pattern! I love it!

      Delete
  14. I found this pattern shortly after you posted it, but it took me until this weekend to try it. I just finished and love the lace look. I think I'm going to use the same pattern to create a matching scarf and gift the set to a friend. Thanks so much!

    ReplyDelete
    Replies
    1. Hi Vera, I am glad that you like the pattern. I would love to see the hat that you made. If you have a facebook would you mind posting a photo to my page? Here is the link: https://www.facebook.com/pages/This-Mama-Loom-Knits/284620761551932

      Delete
  15. Hi Ydsia, I look forward to seeing your picture. But, all of the rows have 6 stitches and not 8. Where the knit 3 together is you are using the stitches from the pegs before and after, so it really is just made on one peg. Hope that helps.

    ReplyDelete
  16. This comment has been removed by the author.

    ReplyDelete
  17. I just started this hat today! After reading the k3tog part about 5 times, I finally got started and am very impressed with this pattern :-) Hopefully I will be done by Mother's Day!

    ReplyDelete
  18. I'm a novice loom knitter and I did this in a day. THANK YOU!!!!

    ReplyDelete
    Replies
    1. So glad the pattern worked for you. I would love to see pictures if you have posted them somewhere.

      Delete
  19. This is such a beautiful stitch pattern! I would love to try it out, is there any chance you could make a tutorial video seeing as I don't really know how do most of the stitches, please? :)

    ReplyDelete
    Replies
    1. Hi Reem A.A.,
      I would love to do a video for this pattern, but am unable to at this time. I will hopefully be able to get something together by the fall. Thank you for you nice comment.

      Delete
  20. I'm a visual learning and I was hoping that there would be a video on this... I hope you can help me out! Also, on step 4 I get how you K3tog but how do you purl after with no string? Is that supposed to be a hole later??? Thanks for your help!

    ReplyDelete
  21. Hi! I'm a begginner knitter and I'm very excited with your pattern. It looks beautiful and it's not too complicated... However, I'm confused when it comes to finishing the hat: do you knit one more round of steps 4-7 after decreasing pegs by half or you just gather the stitches together? I'm not quite sure about how to do this.
    Thanks for your pattern and for your help!

    ReplyDelete
    Replies
    1. Irene, when you decrease by half just go ahead and gather the hat to finish it. Hope you enjoyed the pattern.

      Delete
  22. why dont you put a video for laymans like me to understand the pattern well :)

    ReplyDelete
  23. Please put up a video, I love this pattern but don't know how to do some of the stitches. Thank you...

    ReplyDelete
  24. I just finished this beanie and its gorgeous even though I did it a bit too tight. I definitely be doing it again. Soo easy to do. Thank you for a wonderful pattern

    ReplyDelete
  25. Kristin, I am so glad you enjoyed the pattern. I would love to see a picture if you wanted to post it on my Facebook page. http://www.facebook.com/pages/This-Mama-Loom-Knits/284620761551932

    ReplyDelete
  26. Thank you so much for sharing this pattern! I've been knitting on the loom for about a week now and I've made two hats, one for my daughter (cotton candy multi-color) and one for myself (light gray). They both turned out beautifully, the gray one was much easier to see the pretty lace so I highly suggest a solid color. We love them!!!

    ReplyDelete
  27. what a nice pattern. can i translate it in flemisch and place it on mij fb page?

    ReplyDelete
  28. I've started this and had to start all over so many times. This is my first loom project, I have been trying to get the whole yarn over k3 together part down. I'm left with tons of holes because I read the yarn over, knit 3, yarn over as 3 separate stitches... It is written as so. ? If it just said knit 3 I would think it would make more sense??? I want to make a hat for my daughter, just getting frustrated doing all the brim work and then having to start all over again. And on a related note, why is it so hard to find info on loom knitting on the web? I love this pattern but I have not found many others to choose from anyways. I just want to make a cute little toddler hat, with more detail then just plain knitting the whole thing!

    ReplyDelete
  29. This comment has been removed by the author.

    ReplyDelete
  30. What size loom would you use to make this for a toddler or young child?

    ReplyDelete
  31. I just love this pattern. I'm finishing it off now. The only thing I think I did different is that I did an e-wrap on the peg with three. I 've never had good luck with the flat knit (I'm pretty new to looms and haven't mastered that tension yet) The hat isn't off my loom yet, so I can't decide if it looks just like yours, but it's pretty! Thanks for the pattern!

    ReplyDelete
  32. Beautiful pattern, thanks so much for sharing!

    ReplyDelete
  33. What a gift: sharing this pattern with us. I am fairly new to looming and do a lot of hats and scarves for charities. But now I'm working on hats for 22 grandchildren/great-grandchildren. This pattern is wonderful and I so appreciate your detailed explanation of the yarn over K3TOG. Haven't done anything that advanced yet and I now feel confident to try it. Thank you again for your kindness.

    ReplyDelete
  34. i NEED INFO ON THE 2 NEW HAT PLUS PATTERN. tHE GREEN HAT WITH CARON SOFT LOOKS LIKE A SPIRAL HAT. IS IT JUST ME?
    tHANK YOU FOR ALL YOUR HELP

    ReplyDelete
  35. I would really like to try this hat but even with written instructions I don’t quite get it. I have watched videos and taught myself the purl stitch and to knit a scarf etc. I would love to see a video with audible instructions. Thanks so much.

    ReplyDelete